Knowledge

Commercial construction projects are renowned for their immense consumption of resources and substantial waste generation, leading to significant environmental impacts. The building sector is responsible for approximately 40% of global waste, according to the World Green Building Council. Consequently, adopting eco-friendly practices is not merely a trend but a necessity to preserve our environment. Here, we will explore some strategies to minimize waste and pollution during commercial construction projects.

1. Opt for Sustainable Building Materials

Selection of sustainable, recycled, or certified building materials can significantly decrease waste and environmental harm. These materials often have a lower environmental footprint and can be recycled at the end of their lifecycle.

2. Waste Segregation and Recycling

Establishing dedicated waste segregation areas on-site facilitates the recycling process. Differentiating between wood, metal, plastics, and other waste materials enables the more effective reuse and recycling of materials, diverting them away from landfills.

3. Implement Efficient Waste Management Plan

Prioritizing waste reduction from the project’s inception is critical. A comprehensive waste management plan should be developed, outlining procedures for waste reduction, segregation, and disposal, thereby ensuring regulatory compliance and environmental protection.

4. Optimize Energy Consumption

Reducing energy usage is a core component of eco-friendly construction. Opting for energy-efficient equipment, utilizing renewable energy sources, and implementing energy management systems can considerably diminish energy consumption and associated emissions.

5. Water Conservation Measures

Water is a valuable resource in construction, and its conservation is crucial. Employing water-efficient appliances, capturing and reusing rainwater, and treating wastewater on-site can significantly reduce water waste.

6. Green Construction Practices

Adopting green building standards like LEED or BREEAM can guide construction projects towards sustainability. These certifications ensure that buildings are designed, constructed, and operated to optimize environmental performance.

7. Eco-friendly Painting Solutions

Choosing eco-friendly painting solutions can significantly reduce the environmental impact of construction projects. Opting for paints with low volatile organic compounds (VOCs) or no VOCs can minimize air pollution and the risks associated with harmful chemicals.

8. Employ Construction Management Software

Leveraging construction management software helps in efficient resource planning and waste reduction. Digital platforms enable real-time monitoring of material usage and waste generation, facilitating immediate corrective actions.

9. Educate and Engage Stakeholders

Creating awareness among the project stakeholders about the importance of eco-friendly construction practices is essential. Regular training sessions and workshops can equip the construction workforce with the knowledge and skills required to implement sustainable practices effectively.

10. Implement Dust and Noise Control Measures

Construction sites are major sources of dust and noise pollution. Implementing dust suppression techniques and noise control measures like sound barriers and mufflers can mitigate their impact on the surrounding environment and communities.

The Importance of Eco-conscious Commercial Construction

By embracing eco-friendly construction practices, commercial developers not only contribute to environmental preservation but also enhance their corporate image, build customer trust, and ensure the long-term viability of their projects. Sustainable construction has myriad benefits, including cost savings, improved worker health and safety, and reduced environmental footprint.

At First Nick Companies, we are ardently committed to pioneering sustainable and eco-friendly practices in every project. We recognize the crucial role of commercial entities in fostering environmental conservation and are resolute in our pursuit of innovative, green solutions in construction. Our extensive experience and unwavering dedication to quality and sustainability make us the ideal partner for your commercial construction needs. Embrace sustainability with First Nick Companies and be a part of the movement towards a cleaner, greener future. For more information, please visit firstnick.com.

Reducing waste and pollution during commercial construction projects is a collective responsibility. Incorporating sustainable materials, optimizing resource consumption, employing green construction practices, and selecting eco-friendly partners are vital steps towards achieving this goal. As industry leaders, it is imperative to set the benchmark for sustainable construction and inspire others to follow suit.

Kosta Kritikos,

President

155-E New Boston Street | Woburn, MA 01801

O: 617.628.5130 x 1002| F: 781.305.3055 | C: 617.592.2290

www.firstnick.com | [email protected]

In the dynamic world of construction, safety must be more than a token sentiment — it must be a deeply embedded culture. The construction industry, bustling with noise, machinery, and constant movement, is filled with potential safety hazards that can lead to tragic consequences. In 2019, according to the Bureau of Labor Statistics, there were 5,333 fatal work injuries recorded in the United States. Of these, over 20% were in construction — that’s one in five! But with strategic interventions and a commitment to safety, construction sites can transform into safe havens of productivity. Let’s dig into the most prevalent hazards and ways to prevent accidents.

1. Falls – The Silent Menace

Falls are the leading cause of fatal injuries in the construction industry. This can be due to unsecured scaffolding, unprotected edges, or improper use of fall protection gear. The prevention recipe? Ensure that safety equipment is used correctly and routinely inspected. Train workers to identify and rectify potential fall hazards.

2. Caught-in/between Hazards – The Hidden Pitfalls

These are incidents where a worker is squeezed, crushed, or otherwise trapped between two or more objects. To avoid this, machinery should be properly shut down before maintenance, and trenches should be reinforced to prevent collapse.

3. Struck-by Hazards – The Unforeseen Threats

Objects falling from heights, swinging construction materials, or vehicles moving around the site can lead to ‘struck-by’ injuries. Regular equipment checks, barricades, and high-visibility clothing can significantly mitigate these risks.

4. Electrocutions – The Silent Strike

Electrocutions mainly occur due to contact with power lines, lack of ground-fault protection, and improper use of extension cords. Routine electrical safety inspections, proper grounding, and worker training can curb such incidents.

5. Safety Culture – The Key to Prevention

Beyond addressing individual hazards, fostering a safety culture within your construction site can significantly enhance overall safety. This involves regular safety training, encouraging open communication about safety concerns, and leading by example.

But what does a safety culture look like in practice? It’s an environment where workers feel comfortable reporting potential hazards, where management actively listens and addresses these reports, and where safety is valued over speed or cost.

Safety training should be conducted at regular intervals and should be engaging, using real-life examples and possibly even virtual reality simulations. These training sessions should not just be about the physical aspects of safety but also about the psychological aspects, such as dealing with the fear of reporting safety issues.

A commitment to safety also means investing in high-quality safety equipment and maintenance. From hard hats and harnesses to safety nets and guardrails, every piece of safety equipment should be routinely inspected and maintained.

Leadership is also a vital ingredient in the safety culture mix. Managers and supervisors need to lead by example, adhering to safety rules and encouraging their teams to do the same. They should also promote open communication about safety, allowing workers to voice their concerns without fear of reprisal.

Finally, safety should never be sacrificed for speed or cost. A true safety culture values the well-being of workers above all else. The cost of cutting corners can be far higher in terms of human lives and financial consequences.

In conclusion, cultivating safety on your construction site is not a one-and-done deal; it requires persistent effort, collaboration, and commitment from every team member. From recognizing specific hazards to developing an overall safety culture, the road to a safer workplace is a journey that can save lives, improve productivity, and elevate your construction project to a whole new level. So, why wait? Take the first step towards a safer work environment today.

Kosta Kritikos,

President

155-E New Boston Street | Woburn, MA 01801

O: 617.628.5130 x 1002| F: 781.305.3055 | C: 617.592.2290

www.firstnick.com | [email protected]

https://www.youtube.com/watch?v=z6Oax6FQoiI

Effective leadership is the key to any successful construction project. At the heart of this lies the concept of leading by example, where leaders act as a model for their team, fostering a collaborative and efficient work environment. This approach to leadership is transformative, promoting transparency, safety, quality, respect, continuous learning, and emotional intelligence.

Transparency Fosters Trust

Harvard Business Review reveals that leadership transparency can boost team trust by a staggering 76%. In the construction industry, being transparent means openly communicating project goals, timelines, and challenges. Leaders who embrace this approach inspire their teams to do the same, fostering a trust-rich environment.

Safety: A Shared Priority

Construction is a high-risk field, with the Bureau of Labor Statistics highlighting its significant workplace injury rates. A leader who prioritizes safety not only decreases accident rates but also cultivates a culture of care, improving the overall team environment.

Quality: The Gold Standard

A commitment to quality is crucial for any construction project. McKinsey & Company’s research indicates that teams led by leaders dedicated to quality are 28% more likely to meet deadlines and 19% more efficient in budget adherence. Such leaders set a high bar for their teams to emulate.

Respect Breeds Productivity

Gallup’s study shows a 20% productivity boost in teams led by leaders who foster a respectful work environment. In construction, leaders who treat every team member with respect, irrespective of their role, contribute significantly to a positive and productive work culture.

Continuous Learning: The Road to Innovation

Construction is an ever-evolving field. Leaders who promote continuous learning are likely to inspire a culture of innovation in their teams. The Construction Industry Institute shows that teams that value continuous learning can improve project outcomes by up to 25%.

Emotional Intelligence: A Catalyst for Collaboration

Leaders with high emotional intelligence, capable of understanding and managing their own and their team’s emotions, create a supportive work environment. According to the Journal of Leadership & Organizational Studies, such leaders can boost team collaboration by up to 70%.

In conclusion, leading by example in construction is not just about being a figurehead. It’s about embodying the qualities you want your team to reflect. By being a role model in transparency, safety, quality, respect, learning, and emotional intelligence, leaders not only enhance the team environment but also significantly contribute to project success. This leadership style is a call to action for all construction leaders, for the improvement of our teams and the industry as a whole.

Kosta Kritikos,

President

155-E New Boston Street | Woburn, MA 01801

O: 617.628.5130 x 1002| F: 781.305.3055 | C: 617.592.2290

www.firstnick.com | [email protected]

 

https://www.youtube.com/watch?v=a6SPZ-kpCdw

Artificial Intelligence (AI) has revolutionized many industries and changed the way we live and work. The construction industry is no exception, and AI is expected to transform the way we build our cities and infrastructure. In this blog, we’ll explore seven ways AI will affect the construction industry and the statistics that back up these findings.

#1 Improved safety
Construction sites are inherently dangerous, with workers exposed to various hazards. AI can help reduce these risks by monitoring job sites and identifying potential safety hazards before they cause harm. AI can also analyze data from past incidents to predict future risks, allowing construction managers to take proactive steps to prevent accidents. According to a report by McKinsey, AI-powered safety systems can reduce accidents by up to 25%.

#2 Increased productivity
AI can help construction companies streamline their operations and increase productivity. For example, AI-powered scheduling systems can optimize project timelines, ensure resources are allocated efficiently, and help teams work more effectively. According to a study by FMI, companies that implement AI-powered systems can increase productivity by up to 50%.

#3 Cost saving
AI can help construction companies save money by reducing waste, minimizing rework, and optimizing resource allocation. For example, AI-powered tools can identify areas where materials are being wasted, allowing companies to make adjustments and reduce costs. According to a report by McKinsey, AI can help construction companies reduce costs by up to 20%.

#4 Better project management
AI can help construction managers track progress, monitor budgets, and identify potential issues before they become problems. AI-powered tools can analyze data from multiple sources, including sensors and cameras, to provide real-time insights into project status. According to a report by MarketsandMarkets, the global market for AI in construction is expected to grow from $407 million in 2018 to $1.8 billion by 2023, driven by increased demand for project management solutions.

#5 Enhanced quality control
AI can help construction companies ensure that projects are completed to the highest standards of quality. AI-powered tools can analyze data from sensors and cameras to detect defects and deviations from specifications, allowing companies to take corrective action before they become major issues. According to a report by MarketsandMarkets, the global market for AI in quality control is expected to grow from $345 million in 2018 to $1.2 billion by 2023.

#6 Improved sustainability
AI can help construction companies reduce their environmental impact by optimizing resource use and reducing waste. For example, AI-powered tools can identify areas where energy is being wasted and suggest ways to reduce consumption. According to a report by PwC, AI-powered sustainability solutions can help construction companies reduce their carbon footprint by up to 4%.

#7 Faster and more accurate inspections
AI can help construction companies conduct inspections more quickly and accurately. AI-powered tools can analyze data from sensors and cameras to identify potential issues, allowing inspectors to focus on areas that require attention. According to a report by MarketsandMarkets, the global market for AI-powered inspection solutions is expected to grow from $524 million in 2018 to $2.2 billion by 2023.

In conclusion, AI is set to transform the construction industry in many ways, from improving safety to increasing productivity and reducing costs. As construction companies look to stay competitive in a rapidly changing market, embracing AI-powered tools and technologies will be essential.

At First Nick Companies, we are committed to providing the highest quality commercial painting services to our clients. As the construction industry evolves, we are always looking for ways to improve our operations and stay ahead of the curve. Whether you need interior or exterior painting services, we have the experience and expertise to get the job done right. Contact us today to learn more about how we can help with your next project.

 

Kosta Kritikos,

President

155-E New Boston Street | Woburn, MA 01801

O: 617.628.5130 x 1002| F: 781.305.3055 | C: 617.592.2290

www.firstnick.com | [email protected]

 

As technology continues to improve and evolve, many industries are beginning to incorporate automated systems into their processes. From manufacturing to healthcare, automation has become an important part of the modern workplace. But will robots be more present in commercial painting in 2023?

This is an interesting question that will have a huge impact on the future of the painting industry. Automation has the potential to make painting processes more efficient, cost-effective, and accurate, leading to greater profits for commercial painting businesses. In this blog, we’ll look at the potential for robots to be more present in commercial painting in 2023, the benefits they could bring, and the possible challenges that may arise.

We’ll also explore how painting businesses can prepare for the potential for automation and what commercial painting may look like in 2023 if robots become more common. So, if you’re interested in the future of commercial painting, stay tuned for our insights into this fascinating topic.

Overview of Automation in the Painting Industry

Automation can greatly benefit the painting industry in the coming years, boosting productivity and reducing labor costs. Many painting companies are already incorporating robotic painting systems into their operations, allowing for faster painting applications and fewer mistakes. Automated systems can also perform repetitive tasks quickly and accurately, freeing up human resources for more creative or complex tasks.

Robotic painting systems offer several potential benefits for commercial painting companies. For starters, robots can paint surfaces more quickly and evenly than human workers, meaning less time is spent on each job. Additionally, robots can accurately measure and apply precise amounts of paint, resulting in superior surface coverage and fewer mistakes. Finally, robotic systems can also reduce labor costs by eliminating the need for multiple human workers to complete a job. This can lead to greater efficiency and cost savings for commercial painting businesses.

Benefits of Automation in the Painting Industry

Robots will likely be more prevalent in the commercial painting industry this year as automation becomes a critical part of the modern workplace. Automation can help improve processes by making them more efficient, cost-effective, accurate, and less labor-intensive.

This could increase profits for commercial painting businesses, as they can produce higher quality work with fewer resources. Automation can also help reduce the risk of human error in the painting process, leading to fewer mistakes and higher customer satisfaction.

In addition to improved efficiency and cost savings, automation can also help to enhance the safety of workers by reducing the need for them to climb ladders or handle hazardous materials. Automated systems can also be programmed to work in tight spaces and difficult angles, helping to reduce the risk of injury. Automation can also help to reduce overall waste and pollution in the painting industry by more accurately applying paint and other materials, reducing the amount of energy and materials required for a job.

Overall, automation has the potential to revolutionize the painting industry in 2023. Automation can improve the efficiency, cost-effectiveness, accuracy, safety, and sustainability of the process, allowing commercial painting businesses to increase their profits while providing better customer service. As technology improves, robots will likely play an increasingly important role in the commercial painting industry.

Challenges of Automating Painting Processes

Automating painting processes could revolutionize the commercial painting industry, but it is not without its challenges. Integrating robotics into the workplace requires advanced sensors and programming to ensure accuracy and precision, which can be costly.

Additionally, training robots to paint may be complex and time-consuming, and robots may require frequent maintenance to remain operational. Furthermore, painting with robots may eliminate the need for certain manual labor, potentially leading to job losses and economic disruption.

In addition to the technical and economic challenges, the human-machine interface of painting robots may present a challenge. To be successful, both robots and humans must be able to work together harmoniously, and this can be difficult to achieve.

Robots must be programmed to understand and interpret human commands, and humans must be able to understand and interact with the robots. Automated painting processes must be designed carefully to ensure that robots do not impede the speed and accuracy of the painting process.

Overall, the potential of automated painting processes is exciting, but there are still many challenges that must be addressed before robots become a more viable option in the commercial painting industry.

Depending on the advances in technology by 2023, robots may or may not become more present in commercial painting. However, there will likely be a strong push to continue researching and developing automated painting processes to increase accuracy, cost-effectiveness, and efficiency in the industry.

In conclusion, robots will likely become more present in commercial painting in 2023. Automated painting systems can potentially make painting processes more efficient, cost-effective, and accurate, providing substantial benefits to commercial painting businesses. With the right investments in robotic technology, commercial painting companies can maximize their profits and stay competitive in an ever-changing market.

Kosta Kritikos,

President

155-E New Boston Street | Woburn, MA 01801

O: 617.628.5130 x 1002| F: 781.305.3055 | C: 617.592.2290

www.firstnick.com | [email protected]

https://www.youtube.com/watch?v=6UPLetrXTqU

Millwork is an ever-expanding industry with new trends appearing every year. While new products and techniques are always coming out, some of the most popular ones stick around for a while.

 

When it comes to millwork, trends come and go faster than you might think. So much so that we couldn’t possibly list them all here. However, that doesn’t mean you have to miss out on any of them, either!

Keep reading to know what you should anticipate next year if you’re interested in becoming part of the millwork world sooner rather than later.

Digital Millwork Workflows

Millwork has come a long way in the last few years. In addition to new tools and products, digital millwork workflows are becoming increasingly popular.

Digital millwork workflows take the guesswork out of how to make something with wood.

 
This gives you the ability to create your pieces on the computer before you ever make them for real. Most digital tools offer a series of steps that will help you achieve your desired outcome by using software such as SketchUp or Rhino 3D. These software programs also allow you to create virtual models and renderings of your design so you can see it from every angle before moving forward with production.

The best part is: they’re free! Many companies have seen their user bases explode in recent years because they provide an easy-to-use interface for those looking for a quick start into digital millwork workflows.

3D Printing for Millwork

3D printing has already been on the market for a few years now, but it’s still too early to tell what kind of impact it will have.

3D printers are capable of producing objects from wood, plastic, metal, and even food and other materials. The potential for this technology is limitless and is going to change the way we create things in the future.

While 3D printing will not replace traditional millwork techniques anytime soon, it definitely won’t be long before you start noticing its presence in your workshop.

Robots in the Shop

One of the most popular trends in 2023 will be robots in the shop. The robot revolution has been underway for a while, and many people are expecting more automation to happen in the industry. Whether it is used as a tool or just to help with repetitive tasks, this trend will be here to stay.

This year, we saw many different types of robots. Hot on their heels are hobbyist-friendly kits that you can build with your kids at home. They can even become autonomous and talk to you when you need them to do something specific. While these robots might not replace humans completely just yet, they will certainly help out around the shop and make your life easier in the future.

Building with Composites and Bamboo

Bamboo and composites are two materials that will take your millwork projects to the next level this year. Bamboo is already a very popular material, but composites have just started to become more popular in the last few years.

Composites come in a wide range of colors and textures, as well as some interesting patterns and designs. With these new materials, you can experiment with new looks on old favorites like furniture and art pieces that are both durable and lightweight. They also offer a lot of flexibility because they’re not limited to one shape or size when it comes to use. You can create anything from chairs to bookcases with these new materials.

Bamboo is another type of composite that has been around for millennia but is becoming more widespread due to its beautiful appearance and low cost. These new products offer versatility as well with their ability to be shaped in any way desired by gluing together thin layers of wood at different thicknesses. They are also more durable than lumber because they don’t expand or contract with humidity changes like other woods do, so they resist warping too much over time.

At First Nick Companies, we pride ourselves on our top-quality craftsmanship, and our millwork artisans will always bring the best product to you. Contact us today for more information!

 

 

Kosta Kritikos,

President

155-E New Boston Street | Woburn, MA 01801

O: 617.628.5130 x 1002| F: 781.305.3055 | C: 617.592.2290

www.firstnick.com | [email protected]

 

https://www.youtube.com/watch?v=QaFVo155e14

The first thing anyone sees when they approach a building is its coating. It covers a vast amount of space, making it impossible to ignore. Therefore, an immaculate paint job is essential to creating the right first impression.

 

Inside, the same principle holds true. People will see the paint before anything else and will notice its color and condition even when they’re not actively examining it. Making sure that your interior paint is done and maintained in perfect condition will keep the experience inside your building in line with the expectations set by the outside.

 

Why You Should Count on First Nick Companies for Your Commercial Painting

New Installations

 

With First Nick Companies, you aren’t limited to basic paint. We have experience with a wide variety of interior and exterior coatings. Our options include the chance to get special textures and finishes that most others can’t provide. This service is available for both interior and exterior surfaces

 

We can also install any kind of wall covering. Whether you’d like a mural along one wall or fabric coverings all the way down each hallway, First Nick Companies are ready to make it happen.

 

When you need specialized coatings, look to us for the best solutions. We can apply unique coatings to create markerboard walls, add fire resistance, resist graffiti, repel water, and more. Just call us whenever you need any wall to do more than just look nice.

 

Of course, we are still always ready to apply basic paint. There are many situations in which regular paint is the most appropriate coating, and we will apply it with perfection.

 

Maintenance

 

In commercial environments, it’s common for the paint in certain areas to get damaged long before the entire wall needs to be redone. If ignored, the building will look “raggedy” despite large areas of pristine wall treatment.

 

Our maintenance service prevents this raggedy look from coming to your building. We apply touch-up paint to eliminate chips, scuffs, and scratches without redoing entire walls. This keeps your building looking great in between complete paint jobs. Our crews are discreet, so there is minimal to no disruption during the touch-up process.

 

Expanded Services

 

When you need ongoing carpentry as well as paint installation and maintenance, consider our property management and facility services option. With this, we send crews to inspect and maintain your premises on a regular basis. This ensures that your property keeps looking great over time, with no need to make special calls to get work done.

 

As you can see, First Nick Companies aren’t your typical one-and-done painting service providers. We offer far more than regular paint, and our maintenance services help keep it looking great. Our carpentry services take things up another notch, and keep your building from suffering from the traffic that comes with being open to the public.

 

To get started with any of our services, just contact us here at First Nick Companies in Massachusetts. We’ll be glad to work with you.

Kosta Kritikos,

President

155-E New Boston Street | Woburn, MA 01801

O: 617.628.5130 x 1002| F: 781.305.3055 | C: 617.592.2290

www.firstnick.com | [email protected]

 

 

There’s no doubt about it; the past couple of years have been tough — for all of us. We join almost everyone else in the hope that we won’t have to repeat these times again in our lifetime. We have also learned some lessons, and we hope those lessons will serve us well in the future.

Now is not the time to rest. At First Nick Companies, we think it’s time to adopt a bold vision of the future, and we intend to apply the lessons we have learned as we move ahead.

What, exactly, have those lessons entailed?

Our Team Is Our Backbone

We need our team to thrive, and we acknowledge the responsibility to make that happen in the future. Now that the worst times of the pandemic seem to be ending, we are still faced with global uncertainty in other areas, including continuing shortages, rising prices, and higher interest rates. It is true that tomorrow will not be what the past was. And we take the issues seriously. More than ever before, we are committed to employing an innovative approach to ensure that each team member can thrive personally. That will ensure the future of our business.

Business Partnerships Are Good Investments

The ability — and the need — to build strong relationships with others in the same or related fields will lead to greater success for us all. That has been proven time and time again. “A rising tide lifts all boats!” We value the business partnerships that allow us to share resources, expand each company’s reach, extend our customer base and increase revenue. We see no downside to that investment of time and effort, only long-term stability and strong alliances that benefit us all.

We look forward to reaping the dividends of new business partnerships!

The Highest Quality of Work Is Vital for Success

We will always strive to “go the extra mile,” whether that involves personal effort or a determination to exceed customer expectations. We believe that “good enough” is never enough, and that we can excel at whatever we do. We demand the best of ourselves, our team, and our associates, so that we are able to provide only the best to our customers. That’s what makes the difference at First Nick Companies.

Hiring Will Continue to Be a Challenge

As we move ahead into Quarters 3 and 4 of 2022, we look forward with cautious optimism. But we are also highly optimistic that the construction industry will rebound and reach new heights, both in volume and effectiveness. We look forward to overcoming the challenges we currently face. We have redoubled our recruiting efforts, investing in more innovative methods to reach out to potential employees through varied online efforts, through word of mouth, and innovative benefit packages. In short, we have adopted a “can do” spirit, and as we move into 2023, we will face each day as a new opportunity.

That’s what we have learned from being in the construction industry today and during the past two years.

Are you interested in joining us? Visit our website to learn what we do and what is possible for tomorrow.

Kosta Kritikos,

President

155-E New Boston Street | Woburn, MA 01801

O: 617.628.5130 x 1002| F: 781.305.3055 | C: 617.592.2290

www.firstnick.com | [email protected]

Many people assume the commercial painting industry stays more or less the same most of the time, but this isn’t true. Commercial painting trends come and go, just like residential painting trends. After all, the paint on your walls sets the tone for your building, company, and brand.

If you own a commercial property, one of the ways that you can change the way your business is perceived by customers is by using smart painting practices. Below, we’ve listed five recent trends in the commercial painting industry. At First Nick Companies, we encourage you to consider these trends for your business.

Metallic Paint

Metallic paint makes quite a splash whether featured on an interior or exterior wall. We highly recommend using metallic paint as an accent color rather than a primary color on your walls.

A little goes a long way when it comes to metallic paint! It’s important to work with a commercial painting professional who knows how to choose the right metallic paint for your property. Metallic paint, when used properly, can make quite an impression. When badly applied, metallic paint can wear poorly.

Bold Colors

Draw the attention of your clients and potential clients with the use of bold, vibrant colors. Primary colors like red, yellow, and blue are perfect for attracting the eye.

Other shades like pink, purple, orange, and green can have a similar effect. When using bold colors, apply them against high-contrast backgrounds so that the paint will stand out. Work with your commercial painter to choose colors that will attract attention to your property.

Textured Walls

Textured walls add subtler visual interest than bold colors and metallic paint. Texture can be used in exterior and interior painting projects. It’s important to hire a professional to install texture, as poorly applied texturing can be distracting in a negative way. Poorly applied texture may also not last.

Gradient Effects

A gradient is a painting effect that transitions from one color to another. Gradients can be used to transition from black to white, blue to yellow, or from one neutral to another. The trick to achieving an attractive gradient is making the transition as smooth and seamless as possible. Do you want a gradient for your business? Work with a painting professional with experience.

Color Blocking

Color blocking is the art of painting large blocks of contrasting color on the walls of your building. Color blocking, like adding texture, is a subtle way to add visual interest to your commercial building.

Need Painting Services for Your Commercial Property?

The professionals at First Nick Companies can make your commercial property a sight to behold. Call today to schedule an appointment for a consultation or to get a quote with us.

Kosta Kritikos,

President

155-E New Boston Street | Woburn, MA 01801

O: 617.628.5130 x 1002| F: 781.305.3055 | C: 617.592.2290

www.firstnick.com | [email protected]Commercial operations look to painting professionals to provide superior interior and exterior work. Having a knowledgeable commercial painting company who is update on the latest trends and technologies ensures that clients have a pleasing visual appearance to the premises that withstands daily wear-and-tear. Due to the pandemic, recent trends had adapted to new business environments. Understanding the current industry trends allows painting companies and clients to prepare for future projects.

Green Technologies

More people are ware about how their purchasing power impacts the environment. This factor also holds true with commercial business operators, who are transforming their buildings to sustainable and eco-friendly facilities. They are revamping their entire projects to allow them to “go green” including the types of paints that are used on interior and exterior walls. The need for more sustainable painting options will increase. These sustainable products include paints with lower levels of volatile organic compounds (VOCs) that are harmful to both the environment and human health. By reducing the amount of the toxic chemical, commercial companies may improve the air quality in their facilities.

Beneficial Paint Additives

Manufacturers have become more aware of the impacts that their industries and products may cause to human health and painting operations. So they are changing the way the paints work by placing in additives that create benefits to commercial painting industries.

These additives may involve faster drying times, reduction of mildew growth, better moisture resistance, and improved paint adherence to surfaces. By modifying the way that paint behaves when applied in commercial settings, these additives may decrease the paint’s off-gassing aspects that could lead to poorer air quality while preventing harmful mold form forming. The additives also decrease the work time spent by commercial painters, allowing them to efficiently complete more projects in a range of environments.

Raw Material and Supply Chain Shortages

The availability of raw materials used to create paint have taken a massive hit. More people worked from home during quarantine, which led to them pursing more DIY projects. Exterior and interior painting projects created enormous customer demand on manufacturers who were left scrambling to fill the uptick in supply orders.

Unfortunately, supply simply could not keep up with demand as sourced raw materials became scarce as many of these materials came from global suppliers who experienced supply chain shortages also created by the pandemic. These shortages may lead to smaller quantities of available commercial paints. Commercial companies may find themselves restricted when trying to offer a variety of paints to their customers.

Price Increases

Paint prices have steadily increased an average of 2.5% every year. With the pandemic, these price increases were experienced global due to raw material shortages, supply chain issues, and the increase in customer demand. These issues may cause commercial painting projects to have higher price tags in the coming years.

Another factor that may also increase paint project costs also deals with the labor shortages. With smaller experienced crews available, commercial painting companies may increase prices as they may have to take on fewer projects or have their painters take on longer hours.